Carbon Mineralization Explained: How CO2 Turns to Stone

How carbon mineralization locks CO2 into rock for good: basalt storage, concrete, key projects, costs, limits and who is using it.

By
Published:
Oct 25, 2026
Updated:
Oct 28, 2026

Carbon mineralization turns carbon dioxide into solid carbonate minerals, the same kind of material found in limestone. Because the carbon ends up locked in rock, it is one of the most permanent ways to store CO₂.

At a glance

  • What it is: a reaction between CO₂ and certain minerals that forms stable carbonate rock.
  • Two main routes: injecting CO₂ underground into reactive rock such as basalt or peridotite, or mixing it into materials such as concrete.
  • Speed: in an Icelandic field study, over 95% of injected CO₂ mineralized in less than two years.
  • Best for: permanent storage of CO₂ captured from the air or from industry.
  • Main limit: it needs the right rock and water, and operating capacity is still small.
  • Last updated: October 2026.

How does carbon mineralization work?

Some rocks are rich in calcium, magnesium and iron. When CO₂ meets them in the presence of water, it reacts and forms carbonate minerals. This happens slowly in nature over long periods. Carbon mineralization technology speeds the reaction up by controlling where the CO₂ goes and how it meets the rock. The process needs only water, electricity, CO₂ and reactive rock.

Route 1: storing CO₂ underground in reactive rock

In this approach, captured CO₂ is dissolved in water and pumped into reactive rock formations. The best-known example is the Carbfix project at the Hellisheidi geothermal power plant near Reykjavik, Iceland. A 2016 study in Science, led by Juerg Matter, found that over 95% of the injected CO₂ mineralized in less than two years. Before this, scientists had assumed the process would take hundreds to thousands of years.

Basalt is common, which makes this route promising for regions with suitable volcanic geology. A second rock type, peridotite, is also being used. The company 44.01 pumps carbonated water into peridotite seams deep underground. It says Oman has the largest concentration of peridotite in the world, and its stated goal is to mineralize 1 billion tonnes of CO₂ by 2040. Its first project in Fujairah, in the UAE, handled 1,000 tonnes of locally captured CO₂ a year.

Route 2: mineralization in concrete and materials

CO₂ can also be mineralized above ground. The Swiss start-up neustark, for example, stores CO₂ permanently in recycled concrete. The carbon becomes part of the material and stays out of the atmosphere. Companies including UBS and Boston Consulting Group have bought credits from approaches like this.

Key projects

  • Orca, Iceland: Climeworks' first large direct air capture plant began operating in September 2021 with a nominal capacity of about 4,000 tonnes a year. Its CO₂ is stored with the Carbfix method.
  • Mammoth, Iceland: a larger Climeworks plant, with a nominal capacity of 36,000 tonnes a year, at the same Hellisheidi site. Combined, the two plants were planned to reach about 40,000 tonnes a year. Nominal capacity is a design figure, not what was actually captured. In September 2026 Climeworks said Mammoth's performance more than doubled and its operating cost per tonne halved.
  • Coda Terminal, Iceland: a planned Carbfix hub that would receive CO₂ shipped from industrial sites in Northern Europe, dissolve it in water and inject it into basalt. Carbfix has described a target of 3 million tonnes a year at full scale. Check Carbfix for the current construction status.
  • Jacaranda, Kenya: see the Sirona section below.

Where it fits in carbon removal

Mineralization is a storage step, not a capture step. It is usually paired with a method that captures CO₂ first, such as direct air capture or industrial carbon capture. It differs from enhanced rock weathering, which spreads crushed rock on land so it absorbs CO₂ over time. For the wider picture, see our carbon dioxide removal guide.

It also differs from conventional geological storage, where CO₂ is kept in porous rock under a sealing layer. Mineralization converts the CO₂ into solid rock, so the storage no longer depends on a seal holding.

Sirona's carbon mineralization work

Sirona's Jacaranda project in Nakuru County, Kenya, uses basalt mineralization to store captured CO₂, powered by solar and geothermal energy. The pilot has been running since 2024, and Sirona says the site has potential to remove over 100,000 tonnes a year. Partners include EDF, Cella and Great Carbon Valley. See all of our projects or learn about the technology.

What does it cost?

There is no single price for mineralization, because it is a storage step. The price a buyer pays is set mostly by the capture method it is paired with. As a reference point, when Swiss Re signed its Climeworks deal in 2021, Climeworks' prices were described as several hundred dollars per tonne of CO₂ removed. Projects that mineralize CO₂ from concentrated industrial sources can avoid the energy cost of capturing it from the air. Compare how the buyers of these credits think about price in our carbon removal credits guide.

Benefits and limits

  • Permanence: carbonate minerals are stable, so the risk of CO₂ leaking back is low.
  • Geology matters: in-situ storage needs suitable reactive rock and access to water.
  • Scale: the LSE Grantham Institute reported in June 2026 that only 1.2% of contracted durable carbon removal had been delivered by the end of 2025.
  • Verification: credits still need independent monitoring to confirm how much CO₂ was stored.

FAQ

Is carbon mineralization permanent?

It is considered one of the most durable forms of storage, because the CO₂ becomes solid carbonate mineral. Individual projects still need monitoring and verification.

How long does carbon mineralization take?

In the Hellisheidi field study, over 95% of the injected CO₂ mineralized in less than two years, far faster than earlier assumptions.

What rocks are used for carbon mineralization?

Reactive rocks rich in calcium, magnesium and iron, mainly basalt and peridotite. Concrete and other materials can also be used.

What is the difference between mineralization and enhanced rock weathering?

Mineralization usually means placing captured CO₂ into rock or materials. Enhanced rock weathering spreads crushed rock on land to absorb CO₂ from the air over time.

Sources

Act now

Reach out and join us in fighting climate change

Take the first step toward offsetting your unavoidable carbon emissions.

Remove CO2 with us